PRODUCTS  
 DCDMA SERIE W GROUP  FLUSH JOINT CASING
   

“W” group flush joint and “X” group flush coupled casing are not interchangeable. The “W” series casing is a flush-joint casing that has male thread on one end and female thread on the other. It can be coupled directly and easily to each other.

 

Flush-joint casing has a thicker wall than the flushed coupled type. Though the outside diameter of both types is the same. “W” series casing is about 35 % heavier. “W” series casing has a coarser thread pitch than “X” series, which allow for easier coupling.

DCDMA SERIE "W" GROUP FLUSH JOINT CASING
LENGTH 0,50 m 1,00 m 1,50 m 3,00 m
Size of Casing Wt. Lbs. Wt. Kg. Wt. Lbs. Wt. Kg. Wt. Lbs. Wt. Kg. Wt. Lbs. Wt. Kg.
EW 4,78 2,17 9,56 4,33 14,33 6,50 28,67 13,00
AW 6,43 2,92 12,86 5,83 19,29 8,75 38,59 17,50
BW 11,76 5,33 23,52 10,67 35,28 16,00 70,56 32,00
NW 14,70 6,67 29,40 13,33 44,10 20,00 88,20 40,00
HW 18,74 8,50 37,49 17,00 56,23 25,50 112,46 51,00
 
DCDMA SERIE "W" GROUP FLUSH JOINT CASING
SIZE OF CASING EW AW BW NW HW
Specifications Outside Diameter 46,15 mm 57,27 mm 73,15 mm 89,09 mm 114,49 mm
Inner Diameter 38,28 mm 48,53 mm 60,45 mm 76,39 mm 101,41 mm
Bore of Coupling          
No. of threads Per Inch 4 4 4 4 4